Call (410) 465-4636



We Service and Repair All Chevrolet Cars

2013 Chevrolet Equinox


Chevrolet Equinox

Service Date
Services Performed
  • Brake Rotor Service: Remove any necessary vehicle components to gain access to the brake rotor. Remove existing Brake Rotor and inspect rotor for signs of blueing (An indicator of overheating) Inspect for pitting and measure brake rotor thickness and lateral run-out. Verify minimum thickness specs and attach rotor to machining equipment. Perform machine work to true rotor. Re-inspect and verify proper thickness and reinstall on vehicle. Torque brake rotor to proper specs. Road test as necessary for proper brake operation. Remachine Rear Rotors Note: Some Brake Rotor machining operations will require the brake pads to re-seat and mate with the Brake Rotor surface. This may cause the brakes not to perform properly. The vehicle will not stop as quick as necessary and may cause a gliding feeling when attempting to stop. Please allow extra distance for stopping and try not to get into any panic stops as your brakes may not function properly until the brake pads and rotors re-seat. This may take a day or two. If the brake function does not return to normal operation in a day or two, call and schedule in for a road test and evaluation.
Joanne H. gave our service a 5 star review on 7/4/2019
2013 Chevrolet Equinox 2019-07-05T22:00:36+00:00

2011 Chevrolet Impala


Chevrolet Impala

Service Date
Services Performed
  • Mount and Balance new tires on vehicle
Roger K. gave our service a 5 star review on 6/30/2019
2011 Chevrolet Impala 2019-07-01T22:00:40+00:00

2010 Chevrolet Cobalt


Chevrolet Cobalt

Service Date
Services Performed
  • TRANSAXLE OIL COOLER PIPES – Remove and Replace – Assembly
Eva B. gave our service a 5 star review on 2/22/2019
2010 Chevrolet Cobalt 2019-02-27T23:00:34+00:00

2015 Chevrolet Equinox


Chevrolet Equinox

Service Date
Services Performed
  • Change Engine OIL and Filter. Lube Chassis where necessary. Inspect tires and adjust tire pressure as necessary. Inspect and top off all fluids. Minor inspection of car for needed services and maintenance.
  • Remove tires from vehicle. Set up on Computer Tire Balancer. Perform balance test. Remove all existing weights and re-test balance. Perform proper tire balance to true balance. Move tire position to cross tires going on front and move front tires straight back to rear. (Directional Tires cannot be cross rotated and must stay on the same side of the vehicle and can only be rotated front to rear.) Re-install tire on vehicle and road test for proper vehicle road handling. Note: If tires have not been rotated at proper intervals, the tires that were originally on the rear of the vehicle can have a chopped wear pattern on the tread and when re-positioned on the front of the vehicle may cause some vibration and noise. Balancing will not get rid of this noise. Some tires may quiet down after a few thousand miles. Others will continue to make noise until replaced. Note: Tires need to be related periodically to even out the wear to maximise the life of a tire. Front tires wear on the edges due to the steering. Rear tires wear more flat but will cup due to the light rear ends. Tire rotation is designed to keep the cupping and edge wear to a minimum. Wheel alignments should be performed every 15K miles.
Leo B. gave our service a 5 star review on 2/11/2019
2015 Chevrolet Equinox 2019-02-12T23:00:19+00:00