Call (410) 465-4636

2014 Honda Accord

//2014 Honda Accord

2014 Honda Accord

Honda Accord

Mileage
68,059
Service Date
11/18/2019
Services Performed
  • Remove front wheels. Remove front brake components. Remove existing pads from the brake calipers. Inspect brake caliper operation. Inspect brake hoses for durability and leaks. Reset brake calipers. Transfer over any necessary brake hardware to new brake pads and set new pads to the calipers. Remove brake rotors for machine work or replacement. Re-machine or replace front brake rotors as necessary. Measure finished brake rotor thickness to verify minimum thickness is within specs. Inspect and clean wheel hubs. Inspect and re-pack wheel bearings with grease as necessary. Re-install rotors on vehicle. Re-install brakes and wheels. Test brakes for proper operation. Machine work may be done with brake rotors on or off the vehicle. Road test for proper brake operation. Vehicle may also require a brake fluid flush. Customer Supplied Parts CAUTION: No panic stops for a day or so due to brake pads may need to seat. May need extra braking distance to stop during this period. This notice is generic and may not apply to you.
  • Remove rear wheels. Remove rear brake components. Remove existing pads from the brake calipers. Inspect brake caliper operation. Inspect brake hoses for durability and leaks. Reset brake calipers. Transfer over any necessary brake hardware to new brake pads and set new pads to the calipers. Remove brake rotors for machine work or replacement. Re-machine or replace rear brake rotors as necessary. Measure finished brake rotor thickness to verify minimum thickness is within specs. Inspect and clean wheel hubs. Inspect and re-pack wheel bearings with grease as necessary. Re-install rotors on vehicle. Re-install brakes and wheels. Test brakes for proper operation. Machine work may be done with brake rotors on or off the vehicle. Road test for proper brake operation. Vehicle may also require a brake fluid flush. Customer Supplied Parts CAUTION: No panic stops for a day or so due to brake pads may need to seat. May need extra braking distance to stop during this period. This notice is generic and may not apply to you.
  • Drain Master Cylinder and clean (where applicable) Fill Master Cylinder with new fluid. Open Bleeders, attach flushing equipment to pull new brake fluid through all 4 wheels until contaminated fluid is completely out of system.
 
Farooq K. gave our service a 5 star review on 11/21/2019
2019-11-22T23:00:38+00:00